2026 Nickel & Cobalt Alloy Sheet, Strip & Plate Selection Guide
ZYTC Alloy supplies nickel-based superalloys and cobalt alloys in sheet, strip, and plate forms for aerospace, chemical processing, and medical device manufacturing. This 2026 selection guide compares mainstream grades, updated ASTM/AMS standards, and application profiles to help engineers and procurement teams specify the exact flat product for their operating environment. Every batch is verified in our in-house laboratory.
The 2026 Procurement Reality: Why Standard Revisions Matter
The challenge in sourcing nickel and cobalt flat products is no longer availability—it is the complexity of standard revisions. A single alloy often has separate ASTM and AMS specifications with different mechanical property requirements and processing conditions. Specifying "Inconel 625" without designating the condition or standard revision is a common and expensive procurement error.
In 2026, two major shifts are affecting flat-product sourcing for high-performance alloys:
-
Aerospace Allocation: Aerospace-grade nickel and titanium flat products remain tightly allocated. Lead times for certified AMS stock (especially for Inconel 718 and Ti-6Al-4V ELI) range from three to six months.
-
Medical Grade Compliance: Medical device manufacturers are enforcing stricter traceability. The updated ASTM F136-26 (published February 2026) is now the current standard for Ti-6Al-4V ELI surgical implants, superseding the 2021 edition. Suppliers referencing outdated standards will fail regulatory audits.
Selecting the right flat product requires matching grade, temper/condition, standard revision, and certification pathway.
Nickel-Based Superalloys: High-Temperature Strength & Corrosion Resistance
Nickel alloy sheet and plate are specified for service temperatures above 600°C, aggressive chemical environments, and applications where failure carries unacceptable risk.
Key Grades and Standards (2026):
| Grade | UNS | Primary Flat-Product Standard | Tensile Strength (min.) | Core Positioning |
|---|---|---|---|---|
| Alloy 600 | UNS N06600 | ASTM B168 / AMS 5540 | ≥550 MPa | Nuclear and chemical processing; chloride SCC resistance |
| Alloy 601 | UNS N06601 | ASTM B168 / AMS 5870 | ≥650 MPa | High-temperature oxidation resistance up to 1,200°C |
| Alloy 617 | UNS N06617 | ASTM B168 / AMS 5888 (sheet), 5889 (strip) | ≥810 MPa | Gas turbine combustion chambers; creep strength above 980°C |
| Alloy 625 | UNS N06625 | ASTM B443 / AMS 5599 | ≥830 MPa | Marine, chemical, flue-gas desulfurization; seawater pitting resistance |
| Alloy 718 | UNS N07718 | ASTM B670 / AMS 5596 | ≥1,276 MPa | Aero-engine and gas turbine components; precipitation-hardened |
| Alloy X-750 | UNS N07750 | ASTM B637 / AMS 5598 (sheet/strip) | ≥1,173 MPa (aged) | Springs, fasteners, seal rings; high strength to 871°C |
Standard Revision Alert (Inconel 625):
ASTM B443-2026 explicitly distinguishes between Grade 1 (annealed, for service up to 593°C) and Grade 2 (solution annealed, for service above 593°C where creep resistance is required) for UNS N06625. You must specify the grade in your purchase order to avoid receiving the wrong heat treatment.
Tolerance Standard: SAE AMS 2262J-2025 governs manufacturing tolerances for nickel, nickel alloy, and cobalt alloy sheet, strip, and plate ordered to inch/pound dimensions. This revision remains in force for 2026 procurement.
Titanium Alloys: Aerospace Structure & Medical Implants
Titanium flat products serve two distinct markets with different certification requirements: aerospace structural plate and medical implant sheet/strip.
Key Grades and Standards (2026):
| Grade | UNS | Flat-Product Standard | Typical Thickness Range | Primary Application |
|---|---|---|---|---|
| Commercially Pure Ti (Grade 2, Grade 4) | R50400, R50700 | ASTM B265 | 0.5–100 mm | Chemical processing, marine, medical non-load-bearing |
| Ti-6Al-4V (Grade 5) | R56400 | ASTM B265 / AMS 4911 | 0.5–100 mm | Aerospace structure, general industrial |
| Ti-6Al-4V ELI (Grade 23) | R56401 | ASTM F136-26 / AMS 4907N-2026 | 0.2–76 mm (AMS) | Surgical implants (hip stems, bone plates, dental) |
Critical distinction for medical buyers:
ASTM F136-26, published February 2026, is the current specification for wrought Ti-6Al-4V ELI for surgical implants. It covers strip, sheet, and plate forms. If your supplier references the older ASTM F136-13(2021)e1, verify their certification timeline.
Aerospace note:
AMS 4907N-2026 covers Ti-6Al-4V ELI sheet, strip, and plate from 0.20 to 76.20 mm thickness. This revision is current for 2026 and should be cited in purchase orders for aerospace flat products.
Cobalt Alloys: Wear Resistance & Medical-Grade Flat Products
Cobalt alloy flat products are specified where wear resistance, corrosion resistance, and non-magnetic properties are required simultaneously.
Relevant Grades for Flat Products:
| Grade | UNS | Governing Standard (Flat Product) | Key Characteristics | Primary Flat-Product Applications |
|---|---|---|---|---|
| Elgiloy | R30003 | ASTM F1058 | Non-magnetic, tensile strength up to 2,600 MPa (aged), excellent corrosion resistance | Medical springs, orthodontic archwires, surgical instruments |
| L605 | R30605 | AMS 5537 | High-temperature strength and oxidation resistance up to 1,093°C | Combustion chambers, gas turbine components |
| MP35N | R30035 | ASTM F562 | Ultra-high strength (up to 300 ksi), biocompatible | Specialized medical components (primarily bar/wire, limited strip) |
Tolerance Standard: Cobalt alloy sheet, strip, and plate tolerances are covered under SAE AMS 2262J-2025, the same standard referenced for nickel alloys.
How ZYTC Verifies Cobalt Flat Products:
We use Direct Reading Spectrometry to confirm the exact chemistry of every Elgiloy and L605 batch. For medical-grade strip, we verify tensile strength and hardness on Universal Testing Machines to ensure the temper condition meets your spring design or forming requirements.



Standard Hierarchy: What Actually Governs Acceptance
A recurring source of procurement disputes is confusion between ASTM and AMS specifications for the same alloy.
| Standard Type | Issuing Body | Primary Focus | When to Specify |
|---|---|---|---|
| ASTM | ASTM International | Chemical composition, mechanical properties, general acceptance | Commercial and industrial procurement; multi-industry use |
| AMS | SAE International | Aerospace-specific processing, tolerances, quality systems | Aerospace and defense procurement; requires AMS-certified supply chain |
| ASTM F (medical) | ASTM International | Implant-grade cleanliness, biocompatibility, mechanical requirements | Surgical implant and medical device components |
Example: Inconel 625 plate ordered to ASTM B443 may not satisfy an aerospace purchase order citing AMS 5599. The AMS specification imposes additional processing and inspection requirements not present in the ASTM standard. Always confirm which standard the end-user's quality system recognizes.
Selection Decision Framework
Use the following sequence to narrow your nickel or cobalt flat-product selection:
Step 1: Define the service environment.
-
Temperature > 600°C → Nickel superalloy (617, 625, 718) or cobalt alloy (L605)
-
Seawater or chloride exposure → Inconel 625
-
Surgical implant / medical device → Elgiloy strip (ASTM F1058) or Ti-6Al-4V ELI (ASTM F136-26)
-
Wear resistance + non-magnetic → Elgiloy
Step 2: Confirm the governing standard and revision.
-
Medical: Verify the current ASTM F revision (F136-26 for Ti-6Al-4V ELI; F1058 for Elgiloy)
-
Aerospace: Confirm AMS revision number (AMS 4907N-2026, AMS 2262J-2025, AMS 5537)
-
Commercial: ASTM B443 (625), B168 (600/601/617), B670 (718) are standard references
Step 3: Specify temper or condition.
-
"Inconel 625" is insufficient. Specify Grade 1 (annealed) or Grade 2 (solution annealed) based on service temperature.
-
Elgiloy requires specification of temper condition (spring temper, aged) for mechanical properties.
Step 4: Verify supplier certification capability.
-
For medical: ISO 13485 or equivalent quality system, full traceability to melt
-
For aerospace: AS9100/AS9120 certification, AMS-conforming test reports
-
For all: in-house or third-party verification of chemical composition and mechanical properties
Request a Quote
To receive a material recommendation and quotation, please provide:
-
Alloy type and grade (e.g., Inconel 625, Ti-6Al-4V ELI, Elgiloy, L605)
-
Form (sheet, strip, or plate)
-
Dimensions (thickness × width × length, or coil width and weight)
-
Governing standard and revision (ASTM B443-2026, ASTM F136-26, AMS 5537)
-
Quantity (kg or sheets)
-
Certification requirements
📧 Email: daisy@zytcsteel.com
📱 WhatsApp/WeChat: +86 17335753350
The MP35N "Delivery State Trap": Why Your Bar is Impossible to Machine
Elgiloy & Ni-Span-C 902 Supplier | High-Elasticity Alloy Guide
Related Article