+86-17335753350

Model No: MP35N

UNS R30035 / MP35N Cobalt Alloy

MP35N is a nickel-cobalt-chromium-molybdenum alloy that reaches 260–300 ksi tensile strength only when cold working and aging are matched to your part's manufacturing route. ZYTC Alloy supplies MP35N in annealed, cold-worked and cold-worked + aged conditions, with VIM+VAR melting and per-batch spectro and metallographic verification — so the condition you order is the condition your machinist and your design engineer both expect.
Delivery :
FOB
minimum order :
50 kilograms
Supply Ability :
5000kilograms / Month
Stock Time :
7-10Day
Country of Origin :
CHINA
Quantity :
Contact Now

AS 9120B & ISO 9001:2015 Certified · Founded 1989

 VIM+VAR Melting · Per-Batch Spectro & Metallography


Which Delivery Condition Should You Specify?

Most MP35N procurement problems start here. The same UNS R30035 grade spans a wide performance range depending on delivery condition — and the wrong choice either makes machining impossible or leaves strength on the table.

Delivery ConditionTensile StrengthTypical HardnessBest For
Annealed896 MPa (130 ksi) min.HRC ~25–30Complex machining, forming, welding before final strengthening
Cold Worked1400–1900 MPaHRC ~45–50Springs, guidewires, parts not requiring further shaping
Cold Worked + Aged1790–2070 MPa (260–300 ksi)HRC ~45–55Aerospace fasteners, downhole tools, orthopedic implants

Callout Box:

MP35N work-hardens rapidly. Ordering aged bar for a part that still needs turning or milling will drive tooling cost and cycle time up sharply. Tell us your manufacturing route and we will confirm the condition that fits — not simply the highest strength number on the datasheet.


Product Specifications & Physical Data

ZYTC Alloy supplies UNS R30035 in comprehensive mill forms for medical, aerospace, and oil & gas applications requiring verified mechanical properties and complete material traceability.

Chemical Composition (wt.%) — UNS R30035

ElementSpecification
Cobalt (Co)Balance
Nickel (Ni)33.0–37.0
Chromium (Cr)19.0–21.0
Molybdenum (Mo)9.0–10.5
Titanium (Ti)1.0 max.
Iron (Fe)1.0 max.
Manganese (Mn)0.15 max.
Silicon (Si)0.15 max.
Carbon (C)0.025 max.
Phosphorus (P)0.015 max.
Sulfur (S)0.010 max.
Boron (B)0.010 max.

Physical Properties

PropertyMetricImperial
Density8.43–8.45 g/cm³0.304–0.305 lb/in³
Melting Point1440°C2625°F
Modulus of Elasticity230–234 GPa33.4–34.0 × 10⁶ psi
Modulus of Rigidity80.7 GPa11,700 ksi
Coefficient of Expansion (20–100°C)12.8 µm/m·°C7.1 × 10⁻⁶ in/in·°F

Mechanical Properties

ConditionTensile Strength (min.)Yield Strength (min.)Elongation (min.)
Annealed896 MPa / 130 ksi414 MPa / 60 ksi45%
Cold Worked + Aged1790–2070 MPa / 260–300 ksi1380–1720 MPa / 200–250 ksi6–10%

How We Verify Every MP35N Batch

MP35N's fatigue life and stress-corrosion resistance are governed less by the headline chemistry than by melt quality and inclusion control. ZYTC Alloy supplies MP35N produced by VIM + VAR (triple-melt VIM+ESR+VAR available on request), and each batch passes through an in-house verification sequence before shipment:

  1. Spectrochemical composition check — direct-reading spectrometer confirms Ni, Co, Cr, Mo and trace elements against ASTM F562 / AMS limits.

  2. Metallographic examination — optical microscopy reviews grain size and second-phase distribution, the direct evidence that cold reduction and aging are matched.

  3. Hardness verification — Brinell hardness cross-checks the cold-working level against the ordered condition.

  4. Mechanical property testing — servo-controlled universal testing machine and impact notch verification on sampled lots.

What this means for your MTR: your mill test report is backed by in-house spectro and metallographic records, not only the melter's certificate. Batch-level traceability (heat number → processing lot → inspection record) is available on request.


Fabrication & Material Comparison

  • Annealing: 1066°C (1950°F) × 15–30 min, rapid cool (water quench preferred).

  • Cold Working: high work-hardening rate; strength rises steeply with cold reduction.

  • Age Hardening: 482–593°C (900–1100°F) × 4–6 h, air cool; 566°C/4 h typical, performed after final cold working.

  • Welding: TIG (GTAW), low heat input, weld in annealed condition; post-weld cold working and aging restore full strength.

  • Machining: rigid setups, sharp tools, low speed, high feed, ample coolant.

Material Comparison

Compared WithMP35N Advantage
316L Stainless~300 ksi vs. ~80 ksi; superior chloride corrosion resistance
Inconel 625Higher achievable strength via age hardening; comparable corrosion resistance
Titanium AlloysHigher strength; similar biocompatibility; higher modulus for select medical uses
17-7PHSuperior corrosion resistance; higher strength potential
 

Looking for a Carpenter MP35N alternative?

While Carpenter is a globally recognized brand, sourcing directly from an integrated supply chain partner like ZYTC Alloy can reduce lead times and costs. We supply the exact same ASTM F562 / AMS 5844 material, fully lab-tested, with no third-party markups. 
 

Applications

  • Medical: Orthopedic implants (hip stems, knee components), prosthetic devices, guidewires, catheters, surgical instruments

  • Oil & Gas: Downhole tools, valves, completion equipment, wireline components for HPHT sour wells

  • Aerospace: Fasteners, landing gear components, engine parts, hydraulic actuators

  • Marine: Seawater handling equipment, offshore platform hardware

  • Industrial: High-strength fasteners, springs, instrumentation components

Contact ZYTC Alloy for certified MP35N materials with complete traceability, ASTM/AMS specifications, technical datasheets, and competitive pricing on standard sizes or custom-fabricated components.

Vous cherchez un fournisseur de MP35N en Chine ? Contactez-nous pour une consultation technique.

Email: daisy@zytcsteel.com

WhatsApp/WeChat: +86 17335753350


FAQS

H3:What is the difference between AMS 5844 and AMS 5845?
AMS 5844 specifies solution-treated and cold-drawn MP35N; AMS 5845 adds the aging treatment, delivering the 260–300 ksi strength range.

H3:Can MP35N be machined in the aged condition?
Only by grinding or EDM in practice. For turning or milling, specify annealed or lightly cold-worked stock and plan aging after machining.

H3:Does ZYTC Alloy provide NACE MR0175 compliance documentation?
Yes — MP35N is supplied to ISO 15156-3 requirements, with chemistry and mechanical records supporting sour-service qualification.

H3:What is the minimum order quantity?
Standard MOQ is 50 kg; prototype and trial quantities can be discussed based on form and condition.

Tianjin ZYTC Alloy Technology Co., Ltd
 
 ZYTC Alloy CERTIFICATION
Inspection Equipment