AMS 5891 covers a corrosion- and heat-resistant nickel alloy supplied as bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading. These products are typically used to manufacture turbine rotors, shafts, flanges, blades, and bolts — parts requiring oxidation resistance up to 2100°F (1149°C) and higher strength up to 1800°F (982°C), though applications are not limited to these. Alloy 230 (UNS N06230 / Werkstoff 2.4733 / Haynes® 230) is a Ni-Cr-W-Mo solid-solution-strengthened superalloy. Its engineering value rests on three long-term properties: Long-term oxidation resistance — below 2100°F (1149°C), the oxide scale remains adherent and self-healing under continuous exposure. Long-term nitriding resistance — in nitrogen-bearing atmospheres (heat-treating furnaces, chemical processing equipment), the surface resists brittle nitride layer formation. Long-term structural stability — after prolonged high-temperature service, toughness and strength degrade only modestly, making it suitable for components with design lives measured in years.
If your operating condition combines high temperature + oxidizing or nitriding atmosphere + long service life, Alloy 230 bar is usually worth evaluating against 601 and 617. ZYTC Alloy is an ISO 9001 and AS 9120B certified superalloy manufacturer and supplier, offering AMS 5891 Alloy 230 bar at factory-direct prices with full material traceability and fast global delivery. 
Composition| Element | Min | Max |
|---|
| Carbon | 0.05 | 0.15 | | Manganese | 0.30 | 1.00 | | Silicon | 0.25 | 0.75 | | Phosphorus | -- | 0.03 | | Sulfur | -- | 0.015 | | Chromium | 20.00 | 24.00 | | Molybdenum | 1.00 | 3.00 | | Tungsten | 13.00 | 15.00 | | Aluminum | 0.20 | 0.50 | | Lanthanum | 0.005 | 0.05 | | Cobalt | -- | 5.00 | | Titanium | -- | 0.10 | | Boron | -- | 0.015 | | Iron | -- | 3.00 | | Copper | -- | 0.50 | | Nickel | remainder |
Minimum tensile properties| Property | Value |
|---|
| Tensile Strength | 110 ksi (758 MPa) | | Yield Strength at 0.2% | 45.0 ksi (310 MPa) | | Elongation in 4D | 35% |
Bar & Related Forms (AMS 5891)| Form | Size Range | Condition | Typical Use |
|---|
| Round bar | Φ3 – 500 mm | Annealed | Machined parts, fastener stock | | Forgings | Custom per drawing | Annealed | Flanges, valve bodies, profiled components | | Flash welded rings | Custom diameter | Annealed | Engine casings, turbine structural rings | | Forging stock | Any size | Annealed | Subsequent forging / rolling | | Heading stock | Any size | Annealed | High-temperature bolts, studs |
Other forms of the same grade (can be quoted together): plate / sheet / strip / foil (AMS 5878), welding products (AMS 5890, ERNiCrWMo-1), pipe, tubing, wire, castings.
Specification Requirements You Should VerifySolution heat treatment. Bars, forgings, and flash welded rings shall be solution heat treated by heating to 2150–2275°F (1177–1246°C), holding at the selected temperature within ±25°F (±14°C), for a time commensurate with section thickness but not less than 20 minutes, then water quenched or otherwise rapidly cooled. Temperature measurement shall conform to AMS 2750. Hardness. Hardness shall not exceed 241 HBW, determined per ASTM E10 or equivalent. For bar, hardness is measured at approximately mid-radius; for other shapes, at approximately T/4. Stress-rupture at 1700°F (927°C). A tensile specimen held at 1700°F ± 3°F (927°C ± 2°C) under a continuous load producing an initial axial stress of 9.0 ksi (62 MPa) shall not fracture in less than 24 hours. The test continues to fracture without load change. Elongation after fracture, measured at room temperature over a 4D gauge length, shall be not less than 10%. Testing per ASTM E139.
Product Forms & Availability – Alloy 230 (UNS N06230 / 2.4733 / Haynes 230)Bar & Related Forms (AMS 5891)| Product Form | Size Range | Condition |
|---|
| Round Bar | Φ3mm – 500mm | Annealed | | Forgings | Custom configurations | Annealed | | Flash Welded Rings | Custom diameters | Annealed | | Forging Stock | Any size | Annealed | | Heading Stock | Any size | Annealed |
Additional Alloy 230 Product Forms| Product Form | Specification | Availability |
|---|
| Plate | AMS 5878 | Available | | Sheet | AMS 5878 | Available | | Strip | AMS 5878 | Available | | Foil | AMS 5878 | Available | | Billet | Various | Available | | Wire | Various | Available | | Pipe | Various | Available | | Tubing | Various | Available | | Welding Products | AMS 5890 | Available |
For stock availability, contact Sales.
Specifications – Alloy 230 Bar| Specification | Product Form | Description |
|---|
| AMS 5891 | Bars, forgings, rings | Annealed | | UNS N06230 | Unified numbering system | Alloy 230 | | Werkstoff 2.4733 | German standard | Alloy 230 | | Haynes® 230 | Trade name | Haynes International | | AMS 5878 | Sheet, strip, plate | Alloy 230 sheet products | | AMS 5890 | Welding wire | ERNiCrWMo-1 filler metal |
ApplicationsGas Turbine Components: Combustion cans, transition ducts, flame holders, burner components, afterburner parts Aerospace: Jet engine hot section hardware, turbine rings, casings, thermocouple sheaths Power Generation: Industrial gas turbine components, combustor liners, transition pieces Heat Treating: High-temperature furnace fixtures, radiant tubes, heat-treating baskets, retorts Chemical Processing: High-temperature reactor components, catalyst grid supports, nitriding furnace hardware Flash Welded Rings: Seamless rings for engine casings, turbine hardware, and structural components Fasteners: Heading stock for high-temperature bolts, studs, and specialty fasteners
Why Source From ZYTC AlloyCertification: ISO 9001 + AS 9120B (aerospace supply-chain quality management). Traceability: every bar lot ships with heat number, mill certificate, and original material certification; third-party verification supported. MOQ & lead time: MOQ 50 kg; standard sizes ship in 7–10 days; FOB terms. Capacity: 5,000 kg/month; mixed multi-form orders (bar + plate + welding products) can be consolidated in one shipment. Technical support: machining parameter guidance, alternative grade evaluation, non-standard size customization.
Request a Quote or Technical SupportPlease specify: grade / specification, form, size, quantity, delivery condition, and any third-party inspection requirements. 📧 daisy@zytcsteel.com 📲 WhatsApp: +86 17335753350 |