As an ISO 9001 and AS 9120B certified manufacturer and supplier, ZYTC Alloy offers AMS5659 15-5 PH stainless steel bar in a full range of sizes, shapes, and tempers – ready for immediate shipment at competitive factory-direct prices. AMS 5659 specification covers a corrosion-resistant steel (15-5 PH / UNS S15500) in the form of bars, wire, forgings, flash welded rings, and extrusions in the solution heat treated condition, up to 12 inches (305 mm) in nominal diameter, and stock of any size for forging, flash welded rings, or extruding.
15-5 PH is a precipitation-hardenable martensitic stainless steel strengthened by copper-rich precipitates during aging. The alloy is available in solution heat treated (Condition A) and various aged conditions (H950, H1025, H1050, H1100, H1150). The solution treated condition provides a softer, workable state, while aging develops high strength. Available Forms: Bar (round, flat, hex), wire, forgings, flash welded rings, extrusions, forging stock Size Limit: Up to 12 inches (305 mm) nominal diameter; maximum cross-sectional area 144 in² (930 cm²) Specifications: AMS 5659, ASTM A564, UNS S15500, AMS 5862 (sheet/plate), AMS 5928 (wire)
ApplicationsAerospace: Aircraft structural components, landing gear parts, engine components, high-strength fasteners Oil & Gas: Downhole tools, wellhead equipment, valve components (NACE MR0175) Nuclear: Reactor components, pump shafts, valve stems Chemical Processing: High-strength pump and valve components General Industrial: Gears, shafts, fittings, molds, dies, structural hardware
Chemical Composition of AMS5659 15-5 PH Stainless Steel | Chemical Composition (Weight %) | 15-5 PH Specification |
|---|
| Chromium (Cr) | 14.0 - 15.5 | | Nickel (Ni) | 3.5 - 5.5 | | Copper (Cu) | 2.5 - 4.5 | | Manganese (Mn) | 1.00 max. | | Silicon (Si) | 1.00 max. | | Carbon (C) | 0.07 max. | | Phosphorus (P) | 0.040 max. | | Sulfur (S) | 0.030 max. | | Niobium + Tantalum (Cb+Ta) | 0.15 - 0.45 | | Iron (Fe) | Balance |
| Physical Properties | Metric | Imperial |
|---|
| Density | 7.78 g/cm³ | 0.281 lb/in³ | | Melting Range | 1400 - 1450°C | 2550 - 2640°F | | Modulus of Elasticity | 200 GPa | 29.0 × 10⁶ psi | | Coefficient of Expansion (20-100°C) | 10.8 µm/m·°C | 6.0 µin/in·°F | | Thermal Conductivity | 16.4 W/m·K | 114 BTU·in/hr·ft²·°F |
| Mechanical Properties (Solution Heat Treated – Condition A) | Metric | Imperial |
|---|
| Tensile Strength (max.) | 1100 MPa | 160 ksi | | Yield Strength (0.2% offset, max.) | 480 MPa | 70 ksi | | Elongation (min.) | 10% | 10% |
| Mechanical Properties (Aged Conditions – Minimum) | H950 | H1025 | H1050 | H1100 | H1150 |
|---|
| Tensile Strength (ksi) | 190 | 170 | 160 | 145 | 130 | | Yield Strength (ksi) | 180 | 160 | 150 | 130 | 110 | | Elongation (%) | 12 | 12 | 12 | 15 | 15 | | Reduction of Area (%) | 35 | 40 | 45 | 50 | 50 |
Solution Heat Treatment & Precipitation Hardening CharacteristicsAMS5659 specifies delivery in the solution heat treated condition (Condition A). In this state, the material is soft, ductile, and readily machinable or cold formed. After final component fabrication, a single low-temperature precipitation hardening (aging) cycle develops the desired mechanical properties. Typical tempers include: | Temper | Aging Temperature | Typical Tensile Strength (ksi) | Hardness (HRC) |
|---|
| H 900 | 900°F (482°C) | 190 – 210 | 40 – 47 | | H 925 | 925°F (496°C) | 185 – 200 | 38 – 45 | | H 1025 | 1025°F (552°C) | 170 – 185 | 35 – 43 | | H 1050 | 1050°F (566°C) | 160 – 175 | 32 – 40 | | H 1075 | 1075°F (580°C) | 150 – 165 | 31 – 38 | | H 1100 | 1100°F (593°C) | 140 – 155 | 28 – 35 | | H 1150 | 1150°F (621°C) | 130 – 145 | 25 – 32 |
Unlike conventional martensitic grades, 15-5 PH achieves high strength without distortion or scaling, making it ideal for precision components.
Get a Factory Price Quote TodayWhether you need solution treated bar for further aging, or pre-aged stock for immediate use, ZYTC Alloy delivers AMS5659 15-5 PH stainless steel with full certification and rapid worldwide shipping. 📞 Contact our sales team 📧 Email: daisy@zytcsteel.com
📲 WhatsApp: +86 17335753350 |
