+86-17335753350

Model No: UNS N07718 / W.Nr. 2.4668 / AMS 5663

Alloy 718 Hex Bolts (UNS N07718)

Alloy 718 hex bolts supplied solution treated + double aged to 1275 MPa tensile. Designed for high-strength fastening up to 650°C. Size M3–M100, compliant with AMS 5663 / ASTM B637. AS 9120B certified with EN 10204 3.1 MTR. (Equivalent to Inconel® 718)
Quantity :
Contact Now

Material Introduction

Material GradeAlloy 718 / UNS N07718 / W.Nr. 2.4668
Product FormHex Bolts / Hex Head Cap Screws
Supply ConditionSolution treated + double aged (standard)
Size RangeM3–M100 / 3/16"–4"
Governing StandardsASTM B637, ASME SB637, AMS 5662 / 5663, API 6A718

Product Overview

Alloy 718 hex bolts are precipitation-hardening nickel-chromium-iron fasteners designed for the most demanding high-strength bolting applications. Unlike solid-solution alloys such as Alloy 625 fasteners, Alloy 718 derives its strength from a controlled solution treatment + double ageing heat treatment that precipitates fine γ″ (Ni₃Nb) particles, delivering roughly twice the tensile strength of a 625 bolt at room temperature.

Standard delivery condition is solution treated and double aged per AMS 5663 / ASTM B637, with minimum tensile strength of 1275 MPa (185 ksi) and yield strength of 1034 MPa (150 ksi). Bolts are supplied with an EN 10204 3.1 mill test certificate as standard, with full heat-number traceability and PMI verification. (Equivalent to Inconel® 718)

Available Specifications

ItemRange / Standard
Size RangeM3–M100 / 3/16"–4", Customizable
Length Range3 mm–200 mm and above, Customizable
Thread TypesUNC, UNF, UN, 8UN, BSW, BSF, Metric Coarse/Fine, LH/RH
Thread ToleranceASME B1.1 2A/3A (Inch); ASME B1.13M 6g/6H (Metric)
Dimensional StandardsASME B18.2.1, DIN 931, DIN 933
Head StyleHex, Heavy Hex
Supply ConditionSolution treated + double aged (standard); Solution annealed (on request)

Matching Alloy 718 heavy hex nuts available.

Mechanical Properties

ConditionTensile Strength (min)Yield Strength 0.2% (min)ElongationHardnessApplication
Solution annealed~965 MPa / 140 ksi~550 MPa / 80 ksi30%≤ 100 HRBFurther forming or customer ageing
Solution treated + double aged (Standard)1275 MPa / 185 ksi1034 MPa / 150 ksi12%≥ 331 HBWFinished load-bearing fasteners

Maximum Service Temperature: Fasteners operate up to 650°C (material test limit), with short-term exposure up to 700°C.

Surface Treatment & Galling Control

TreatmentApplicationDetails
PassivationGeneral corrosion resistancePer AMS 2700, suitable for most non-aerospace fasteners
Silver platingHigh-temp anti-gallingPer AMS 2411, typical thickness 0.0002"min, applied to internal threads
Xylan / PTFE coatingRoom-temp anti-galling, controlled torqueProvides predictable torque-tension relationship

Typical Applications

  • Aerospace: Engine exhausts, turbochargers, high-temperature joints
  • Gas Turbine: Turbine casings, high-temperature flange connections
  • Oil & Gas: Downhole tools, wellhead equipment, sour service environments
  • Cryogenic to High-Temp: Wide temperature range bolting from cryogenic to 650°C

Certifications & Quality Assurance

  • ☑ AS 9120B – Aerospace quality management system certification
  • ☑ ISO 9001:2015 – International quality management standard
  • ☑ Full material traceability – From melting source through final delivery
  • ☑ Mill test reports (MTR) – Available with every shipment, including chemical and mechanical test results
  • ☑ Third-party inspection – Optional, can be arranged upon request
  • ☑ Positive Material Identification (PMI) – Available as an added verification service
 
Unlike traders who rely on paper certificates, ZYTC verifies 100% of Alloy 718 washers via in-house PMI (Positive Material Identification) to prevent material mix-ups.

Contact ZYTC Alloy for verified Inconel® 718 nickel alloy products, custom sizes and factory competitive quotations.
📧 Email: daisy@zytcsteel.com
📲 WhatsApp: +86 17335753350
Tianjin ZYTC Alloy Technology Co., Ltd
 
 ZYTC Alloy CERTIFICATION
Inspection Equipment